PIXMA Printer MG5450 Wireless Connection Setup

Posted on

Canon PIXMA Printer MG5450 Wireless Connection Setup – How do I connect my Canon printer to WIFI? Wireless Connection Setup Some accessibility factors (from time to time referred to as routers or hubs) attributes an automated connection button labeled “WPS” which stands for Wi-Fi Protected Setup.  This enables permitted products this kind of as your Canon PIXMA MG5450 to attach on your network devoid of needing to enter a password, and it will allow a rapidly and straightforward procedure of connecting your products.

This process is undoubtedly the easiest usually means of connecting your Printer MG5450 Wireless, so if your accessibility stage has a WPS button, please choose the ‘WPS Connection Method’ tab beneath for guidelines on connecting building use of this course of action. If the router would not help WPS we have presented solution suggestions to have your Canon PIXMA MG5450 linked so please choose the ‘Standard Connection Method’ tab under.

Printer MG5450 Wireless

Printer MG5450 Wireless

Printer MG5450 Wireless WPS Connection Method

Ahead of we start off, some ailments will have to be accomplished to perform with the WPS press button course of action:

  1. The accessibility situation has to have an real bodily WPS drive button presented. Remember to examine along with your device’s customer manual for specifics. In situation the WPS drive button is not obtainable, you ought to make use of the suggestions to the Regular Connection Method tab.
  2. Your network will have to be utilizing the WPA (Wi-Fi Protected Access) or WPA2 protection protocol. Most WPS enabled accessibility factors to use this protocol.
  3. Ensure that the printer is turned on. Press and preserve the (Wi-Fi) button about the major with the printer until the orange alarm lamp flashes at the time soon after which you can launch it. Guarantee that the Wi-Fi button starts to flash blue soon after which head to your accessibility area and push the (WPS) button within two minutes. For serious facets about pressing the WPS button, try to remember to verify with the accessibility situation guide.

The blue Wi-Fi lamp all-around the printer will retain on ?ash even though in search of for, or connect in the direction of the accessibility area. During the setup, the environmentally pleasant electrical energy lamp can even start off to flash. When the printer has produced a romance to the wi-fi network effectively, the blue and eco-pleasant bulbs will cease flashing and proceed to be lit.

To verify that the printer is the right way linked to your wi-fi network, you could print out the neighborhood configurations of one’s printer if you want:

  • Be certain that your printer is turned on.
  • Load a sheet of A4 or Letter-sized very simple paper.
  • Press and hold the Cancel(MASTER) Cancel Button button till the orange alarm lamp flashes fifteen moments and soon after that launch it. The network information website will be printed.

When referring on the printout, verify out which the “Connection” signifies “Active” and that the SSID -Service Set Identifier (or probably the title of the wireless network) signifies the appropriate identify of the wi-fi network.

  • This concludes the WPS setup process.
  • Please now proceed by putting in the application to make the most out of your Canon PIXMA MG5450.
  • If you do not have the set up CD that came with your solution, please download the manuals and software.
  • If the wireless setup is nonetheless failing soon after following this manual, please contact us for even further help.

Printer MG5450 Wireless Standard Connection Method

Remember to use the hyperlinks down under to verify out the appropriate suggestions for the working process:

Printer MG5450 Wireless Standard Connection Method – For Windows consumers only

  1. Insert the CD that came with your printer and runs the setup. If your “Setup CD-ROM” does not autorun, insert the CD-ROM to the laptop when much more and click on (My Laptop) or (This Computer procedure), select the CD-ROM and double-click (MSETUP4.EXE). If you do not deliver the CD (’s) that came with your merchandise, be certain to receive the manuals and application bundle.
  2. When the original display seems, click on (Next).
  3. Select (Wireless LAN Connection) as a connection process, then click (Next).
  4. Select (Access Point Connection (encouraged)) as the wireless LAN connection process then click (Next).
  5. Ensure that your printer is turned on, make certain the green energy lamp is on and then click (Next).
  6. The application will now briefly search your network for any printers currently linked. If this is the very first time you are setting up your printer, it will not be identified. So please make sure that (Setting printer could not be found on the listing) is chosen, then click (Next).
  7. The Setup Guide Installation will now start off.
  8. Click on (Next).
  9. Click on (Cableless setup).
  10. When the following display seems, hold down the (Wi-Fi ) button (A) on the printer till the orange alarm lamp flashes two instances and release soon after the 2nd flash, then click (Next).
  11. Make certain that the blue Wi-Fi lamp flashes swiftly and the green energy lamp is lit, then click on (Next).
  12. The following message will be displayed
  13. Once the connection to the accessibility stage is finished click (Next).
  14. When the following display seems, choose your area and click (Next).
  15. When the following display seems, choose your language and then click (Next).
  16. If the subsequent display seems, select out the system you want to set up, then click on (Following). If you are uncertain which laptop application you want to set up at this time, actually do not be concerned, as you can uninstall it in a later on on stage in situation you want.
  17. When the following display seems, click on (Yes) to agree to the finish consumer license agreement.
  18. When the following display seems, click on (Next).
  19. The application bundle will now place in. If the following keep track of is exhibited all through the set up, just click on (Redetect) to search for your printer when once more. Based on your neighborhood configuration, it could effectively get a minute or so for that application bundle to detect the printer. This will entail clicking on redetect sometimes.
  20. As quickly as the Cableless setup is complete, the following display may be exhibited to indicate the solution inside your printer as effectively as determine (or SSID) of your wi-fi neighborhood. Click (Comprehensive).
  21. If that is the very first time you are area up your printer, if the pursuing show is exhibited, click on (Execute) and comply with the on-display instructions to complete the print head alignment, if not just click on (Next).
  22. When the following display is displayed click (Next).
  23. If you want to register your printer at this stage click (Next), alternatively you can register later on utilizing the Quick Menu application, so click (Cancel).
  24. If you want to get component in the Extended Survey Program click (Agree). Alternatively, click on (Do not agree).
  25. If the following display is displayed and you would like to send a check print to your printer, click (Execute). If not, click (Next).
  26. Click on (Exit) to full the set up.

This Printer MG5450 Wireless the Windows setup

Should the wi-fi set up continues to be failing soon after following this manual, make certain you get in touch with us for even much more aid.

Printer MG5450 Wireless Cableless Setup process (For Mac consumers only)

Before you start off, please download the installation software.

  1. Once downloaded, go to the area of the file and double-click it. When the following display is displayed, double-click (Setup).Printer MG5450 Wireless
  2. When the following display is displayed, click Open.Printer MG5450 Wireless
  3. When the original display seems, click on (Next).
  4. You could be asked to form in your password to proceed with the set up. Type in your password and click on (Install Helper).
  5. Click (Next).
  6. Select (Wireless LAN Connection) as a connection process and then click (Next).
  7. Select (Access Point Connection (encouraged)) as the wireless LAN connection process then click (Next)
  8. Ensure that your printer is turned on and the green energy lamp is lit and then click (Next).
  9. The system will now briefly lookup your network for practically any printers now linked. If this can be the quite very first time you may be area up your printer, it’ll not be identified. So try to remember to make certain that (Environment printer could not be located on the listing) is chosen, then click (Next).
  10. If the following display seems, choose (Open).
  11. Click on (Next).
  12. Click on (Cableless setup).
  13. When the following display seems, hold down the (Wi-Fi ) button A on the printer till the orange alarm lamp flashes two instances and release soon after the 2nd flash, and then click (Next).
  14. Make certain that the blue Wi-Fi lamp flashes swiftly and the green energy lamp is lit, and then click on (Next).
  15. The following message will be displayed:
  16. When the following message is displayed, click on (Allow).
  17. Once the connection to the accessibility stage is finished click (Next).
  18. When the following display seems, choose your area, and then click on (Next).
  19. When the following display seems, choose your language and click (Next).
  20. When the following display seems, choose the application you want to set up, and then click on (Next). If you are not certain which application you want to set up at this stage, do not be concerned, as you can constantly uninstall it at a later on stage if you want.
  21. When the following display seems, click (Yes) to agree to the finish consumer license agreement.
  22. Should the following display seem, if you want to generate an alias of the guide on your desktop click (Agree), otherwise click (Do not agree) to skip?
  23. The application will now download and set up.
  24. Within the Canon IJ Network device, display selects the detected printer and click (Next).
  25. When the following display seems, click (Add Printer).
  26. When the following display is displayed, choose the (Canon IJ Network) edition of your printer, and click (Add).
  27. The following display will briefly be displayed.
  28. When the following display seems, click (Next).
  29. If this is undoubtedly the quite very first time you are atmosphere up your printer, in the occasion the following show display is proven, just click on (Execute) and comply with the on-display advice to perform the print head alignment, otherwise click on (Upcoming).
  30. When the following display seems, click (Next).
  31. If you want to register your printer at this stage click (Next), alternatively you can register later on utilizing the Quick Menu application, so click (Cancel).
  32. If you want to get component in the Extended Survey Program click (Agree). Alternatively, click (Do not agree).
  33. Should the following display seem, if you want to carry out a check print to verify the network setup click (Execute), otherwise to skip this click (Next)?
  34. Click (Exit) to full the set up.

This Printer MG5450 Wireless the Mac setup

If the wireless setup is nonetheless failing soon after following this manual, please contact us for even further help.  or get Information from Official Website Canon