PIXMA Printer MG7150 Wireless Connection Setup

Posted on

Canon PIXMA Printer MG7150 Wireless Connection Setup – How do I connect my Canon printer to WIFI? Wireless Connection Setup Some entry factors (often referred to as routers or hubs) options an automated connection button labeled “WPS” which stands for Wi-Fi Protected Setup.  This enables permitted units this kind of as your Canon PIXMA MG7150 to attach on your network devoid of needing to enter a password, and it will allow a rapid and straightforward technique of connecting your units.

This system is undoubtedly the easiest indicates of connecting your Printer MG7150 Wireless, so if your entry stage has a WPS button, please pick the ‘WPS Connection Method’ tab underneath for directions on connecting creating use of this course of action. If the router would not help WPS we have offered alternative tips to have your Canon PIXMA MG7150 linked so please pick the ‘Standard Connection Method’ tab under.

Printer MG7150 Wireless

Printer MG7150 Wireless

Printer MG7150 Wireless WPS Connection Method

Ahead of we begin, some ailments need to be attained to do the job with the WPS press button course of action:

  1. The entry concern has to have an real bodily WPS drive button provided. Remember to examine along with your device’s client manual for specifics. In situation the WPS drive button is not obtainable, you should really use the suggestions to the Regular Connection Method tab.
  2. Your network need to be employing the WPA (Wi-Fi Protected Access) or WPA2 safety protocol. Most WPS enabled entry factors to use this protocol.
  3. Ensure that the printer is turned on. Press and preserve the (Wi-Fi) button about the top with the printer until the orange alarm lamp flashes at the time just after which you can launch it. Guarantee that the Wi-Fi button commences to flash blue just after which head to your entry location and push the (WPS) button within two minutes. For serious elements about pressing the WPS button, keep in mind to check out with the accessibility concern guide.

The blue Wi-Fi lamp all over the printer will continue to keep on ?ash whilst searching for for, or connect in the direction of the accessibility location. During the setup, the environmentally pleasant electrical energy lamp can even begin to flash. When the printer has manufactured a connection to the wi-fi network effectively, the blue and eco-pleasant bulbs will cease flashing and carry on to be lit.

To verify that the printer is effectively linked to your wi-fi network, you could print out the local community configurations of one’s printer if you want:

  • Be positive that your printer is turned on.
  • Load a sheet of A4 or Letter-sized easy paper.
  • Press and hold the Cancel(MASTER) Cancel Button button until eventually the orange alarm lamp flashes fifteen moments and just after that launch it. The network information web-site will be printed.

When referring on the printout, check out out which the “Connection” signifies “Active” and that the SSID -Service Set Identifier (or possibly the title of the wireless network) signifies the right identify of the wi-fi network.

  • This concludes the WPS setup method.
  • Please now proceed by putting in the application to make the most out of your Canon PIXMA MG7150.
  • If you do not have the set up CD that came with your item, please download the manuals and software.
  • If the wireless setup is nevertheless failing just after following this manual, please contact us for even more help.

Printer MG7150 Wireless Standard Connection Method

Remember to use the hyperlinks down under to check out out the right suggestions for the working system:

Printer MG7150 Wireless Standard Connection Method – For Windows end users only

  1. Insert the CD that came with your printer and runs the setup. If your “Setup CD-ROM” does not autorun, insert the CD-ROM to the computer system the moment much more and click on (My Laptop) or (This Computer technique), select the CD-ROM and double-click (MSETUP4.EXE). If you do not deliver the CD (’s) that came with your merchandise, be positive to get the manuals and application package deal.
  2. When the first display seems, click on (Next).
  3. Select (Wireless LAN Connection) as a connection system, then click (Next).
  4. Select (Access Point Connection (encouraged)) as the wireless LAN connection system then click (Next).
  5. Ensure that your printer is turned on, make positive the green energy lamp is on and then click (Next).
  6. The application will now briefly search your network for any printers previously linked. If this is the initially time you are setting up your printer, it will not be observed. So please make sure that (Setting printer could not be found on the listing) is chosen, then click (Next).
  7. The Setup Guide Installation will now begin.
  8. Click on (Next).
  9. Click on (Cableless setup).
  10. When the following display seems, hold down the (Wi-Fi ) button (A) on the printer until eventually the orange alarm lamp flashes two instances and release just after the 2nd flash, then click (Next).
  11. Make positive that the blue Wi-Fi lamp flashes swiftly and the green energy lamp is lit, then click on (Next).
  12. The following message will be displayed
  13. Once the connection to the entry stage is finished click (Next).
  14. When the following display seems, pick your area and click (Next).
  15. When the following display seems, pick your language and then click (Next).
  16. If the subsequent display seems, select out the plan you want to set up, then click on (Following). If you are uncertain which computer system application you want to set up at this time, seriously do not be concerned, as you can uninstall it in a later on on stage in situation you want.
  17. When the following display seems, click on (Yes) to agree to the finish consumer license agreement.
  18. When the following display seems, click on (Next).
  19. The application package deal will now place in. If the following keep track of is exhibited during the set up, just click on (Redetect) to search for your printer the moment yet again. Based on your local community configuration, it could properly get a minute or so for that application package deal to detect the printer. This will entail clicking on redetect sometimes.
  20. As quickly as the Cableless setup is complete, the following display could possibly be exhibited to indicate the item inside of your printer as properly as recognize (or SSID) of your wi-fi local community. Click (Comprehensive).
  21. If that is the initially time you are place up your printer, if the pursuing show is exhibited, click on (Execute) and adhere to the on-display instructions to attain the print head alignment, if not just click on (Next).
  22. When the following display is displayed click (Next).
  23. If you want to register your printer at this stage click (Next), alternatively you can register later on employing the Quick Menu application, so click (Cancel).
  24. If you want to get component in the Extended Survey Program click (Agree). Alternatively, click on (Do not agree).
  25. If the following display is displayed and you would like to send a check print to your printer, click (Execute). If not, click (Next).
  26. Click on (Exit) to comprehensive the set up.

This Printer MG7150 Wireless the Windows setup

Should the wi-fi set up continues to be failing just after following this manual, make positive you phone us for even much more assist.

Printer MG7150 Wireless Cableless Setup system (For Mac end users only)

Before you begin, please download the installation software.

  1. Once downloaded, go to the place of the file and double-click it. When the following display is displayed, double-click (Setup).Printer MG7150 Wireless
  2. When the following display is displayed, click Open.Printer MG7150 Wireless
  3. When the first display seems, click on (Next).
  4. You could be asked to form in your password to carry on with the set up. Type in your password and click on (Install Helper).
  5. Click (Next).
  6. Select (Wireless LAN Connection) as a connection system and then click (Next).
  7. Select (Access Point Connection (encouraged)) as the wireless LAN connection system then click (Next)
  8. Ensure that your printer is turned on and the green energy lamp is lit and then click (Next).
  9. The plan will now briefly lookup your network for just about any printers now linked. If this can be the quite initially time you could possibly be place up your printer, it’ll not be found. So keep in mind to make positive that (Environment printer could not be located on the listing) is chosen, then click (Next).
  10. If the following display seems, pick (Open).
  11. Click on (Next).
  12. Click on (Cableless setup).
  13. When the following display seems, hold down the (Wi-Fi ) button A on the printer until eventually the orange alarm lamp flashes two instances and release just after the 2nd flash, and then click (Next).
  14. Make positive that the blue Wi-Fi lamp flashes swiftly and the green energy lamp is lit, and then click on (Next).
  15. The following message will be displayed:
  16. When the upcoming message is displayed, click on (Allow).
  17. Once the connection to the entry stage is finished click (Next).
  18. When the following display seems, pick your area, and then click on (Next).
  19. When the following display seems, pick your language and click (Next).
  20. When the following display seems, pick the application you want to set up, and then click on (Next). If you are not positive which application you want to set up at this stage, really do not fret, as you can constantly uninstall it at a later on stage if you want.
  21. When the following display seems, click (Yes) to agree to the finish consumer license agreement.
  22. Should the following display seem, if you want to develop an alias of the guide on your desktop click (Agree), otherwise click (Do not agree) to skip?
  23. The application will now download and set up.
  24. Within the Canon IJ Network instrument, display selects the detected printer and click (Next).
  25. When the following display seems, click (Add Printer).
  26. When the following display is displayed, pick the (Canon IJ Network) edition of your printer, and click (Add).
  27. The following display will briefly be displayed.
  28. When the following display seems, click (Next).
  29. If this is undoubtedly the quite initially time you are atmosphere up your printer, in the occasion the following show display is proven, just click on (Execute) and comply with the on-display advice to perform the print head alignment, otherwise click on (Upcoming).
  30. When the following display seems, click (Next).
  31. If you want to register your printer at this stage click (Next), alternatively you can register later on employing the Quick Menu application, so click (Cancel).
  32. If you want to get component in the Extended Survey Program click (Agree). Alternatively, click (Do not agree).
  33. Should the following display seem, if you want to execute a check print to verify the network setup click (Execute), otherwise to skip this click (Next)?
  34. Click (Exit) to comprehensive the set up.

This Printer MG7150 Wireless the Mac setup

If the wireless setup is nevertheless failing just after following this manual, please contact us for even more help.  or get Information from Official Website Canon