PIXMA Printer PRO-10 Wireless Connection Setup

Posted on

Canon PIXMA Printer PRO-10 Wireless Connection Setup – How do I connect my Canon printer to WIFI? Wireless Connection Setup Some accessibility factors (occasionally referred to as routers or hubs) options an automated connection button labeled “WPS” which stands for Wi-Fi Protected Setup.  This enables permitted gadgets this kind of as your Canon PIXMA PRO-10 to attach on your network devoid of needing to enter a password, and it will allow a quickly and effortless process of connecting your gadgets.

This strategy is undoubtedly the easiest usually means of connecting your Printer PRO-10 Wireless, so if your accessibility stage has a WPS button, please pick the ‘WPS Connection Method’ tab underneath for directions on connecting producing use of this procedure. If the router would not help WPS we have supplied selection recommendations to have your Canon PIXMA PRO-10 linked so please pick the ‘Standard Connection Method’ tab beneath.

Printer PRO-10 Wireless

Printer PRO-10 Wireless

Printer PRO-10 Wireless WPS Connection Method

Ahead of we begin, some ailments should be accomplished to perform with the WPS press button procedure:

  1. The accessibility situation has to have an real bodily WPS drive button made available. Remember to examine along with your device’s client manual for specifics. In situation the WPS drive button is not obtainable, you must employ the suggestions to the Regular Connection Method tab.
  2. Your network should be employing the WPA (Wi-Fi Protected Access) or WPA2 safety protocol. Most WPS enabled accessibility factors to use this protocol.
  3. Ensure that the printer is turned on. Press and preserve the (Wi-Fi) button about the top with the printer until the orange alarm lamp flashes at the time soon after which you can launch it. Guarantee that the Wi-Fi button commences to flash blue soon after which head to your accessibility area and push the (WPS) button within two minutes. For authentic factors about pressing the WPS button, keep in mind to test with the accessibility situation guide.

The blue Wi-Fi lamp all-around the printer will maintain on ?ash although looking for for, or connect in direction of the accessibility area. During the setup, the environmentally pleasant electrical electrical power lamp can even begin to flash. When the printer has created a partnership to the wi-fi network effectively, the blue and eco-pleasant bulbs will cease flashing and proceed to be lit.

To verify that the printer is appropriately linked to your wi-fi network, you may possibly print out the neighborhood configurations of one’s printer if you want:

  • Be confident that your printer is turned on.
  • Load a sheet of A4 or Letter-sized uncomplicated paper.
  • Press and hold the Cancel(MASTER) Cancel Button button right up until the orange alarm lamp flashes fifteen moments and soon after that launch it. The network information web-site will be printed.

When referring on the printout, test out which the “Connection” signifies “Active” and that the SSID -Service Set Identifier (or maybe the title of the wireless network) signifies the good title of the wi-fi network.

  • This concludes the WPS setup method.
  • Please now proceed by putting in the software program to make the most out of your Canon PIXMA PRO-10.
  • If you do not have the set up CD that came with your solution, please download the manuals and software.
  • If the wireless setup is nonetheless failing soon after following this manual, please contact us for more help.

Printer PRO-10 Wireless Standard Connection Method

Remember to use the hyperlinks down beneath to test out the appropriate suggestions for the working strategy:

Printer PRO-10 Wireless Standard Connection Method – For Windows end users only

  1. Insert the CD that came with your printer and runs the setup. If your “Setup CD-ROM” does not autorun, insert the CD-ROM to the pc after much more and click on (My Laptop) or (This Computer process), choose the CD-ROM and double-click (MSETUP4.EXE). If you do not supply the CD (’s) that came with your merchandise, be confident to get the manuals and software program package deal.
  2. When the original display seems, click on (Next).
  3. Select (Wireless LAN Connection) as a connection strategy, then click (Next).
  4. Select (Access Point Connection (proposed)) as the wireless LAN connection strategy then click (Next).
  5. Ensure that your printer is turned on, make confident the green electrical power lamp is on and then click (Next).
  6. The software program will now briefly search your network for any printers currently linked. If this is the initial time you are setting up your printer, it will not be observed. So please assure that (Setting printer could not be positioned on the record) is chosen, then click (Next).
  7. The Setup Guide Installation will now begin.
  8. Click on (Next).
  9. Click on (Cableless setup).
  10. When the following display seems, hold down the (Wi-Fi ) button (A) on the printer right up until the orange alarm lamp flashes two occasions and release soon after the 2nd flash, then click (Next).
  11. Make confident that the blue Wi-Fi lamp flashes rapidly and the green electrical power lamp is lit, then click on (Next).
  12. The following message will be displayed
  13. Once the connection to the accessibility stage is finished click (Next).
  14. When the following display seems, pick your area and click (Next).
  15. When the following display seems, pick your language and then click (Next).
  16. If the subsequent display seems, choose out the plan you want to set up, then click on (Following). If you are uncertain which pc software program you want to set up at this time, definitely do not be concerned, as you can uninstall it in a later on on stage in situation you want.
  17. When the following display seems, click on (Yes) to agree to the finish consumer license agreement.
  18. When the following display seems, click on (Next).
  19. The software program package deal will now place in. If the following keep track of is exhibited all through the set up, just click on (Redetect) to search for your printer after once again. Based on your neighborhood configuration, it may possibly very well get a minute or so for that software program package deal to detect the printer. This will entail clicking on redetect sometimes.
  20. As quickly as the Cableless setup is complete, the following display could possibly be exhibited to indicate the solution inside of your printer as very well as recognize (or SSID) of your wi-fi neighborhood. Click (Comprehensive).
  21. If that is the initial time you are area up your printer, if the pursuing show is exhibited, click on (Execute) and observe the on-display instructions to attain the print head alignment, if not just click on (Next).
  22. When the following display is displayed click (Next).
  23. If you want to register your printer at this stage click (Next), alternatively you can register later on employing the Quick Menu software program, so click (Cancel).
  24. If you want to get aspect in the Extended Survey Program click (Agree). Alternatively, click on (Do not agree).
  25. If the following display is displayed and you would like to send a check print to your printer, click (Execute). If not, click (Next).
  26. Click on (Exit) to full the set up.

This Printer PRO-10 Wireless the Windows setup

Should the wi-fi set up continues to be failing soon after following this manual, make confident you contact us for even much more aid.

Printer PRO-10 Wireless Cableless Setup strategy (For Mac end users only)

Before you begin, please download the installation software.

  1. Once downloaded, go to the area of the file and double-click it. When the following display is displayed, double-click (Setup).Printer PRO-10 Wireless
  2. When the following display is displayed, click Open.Printer PRO-10 Wireless
  3. When the original display seems, click on (Next).
  4. You may possibly be asked to sort in your password to proceed with the set up. Type in your password and click on (Install Helper).
  5. Click (Next).
  6. Select (Wireless LAN Connection) as a connection strategy and then click (Next).
  7. Select (Access Point Connection (proposed)) as the wireless LAN connection strategy then click (Next)
  8. Ensure that your printer is turned on and the green electrical power lamp is lit and then click (Next).
  9. The plan will now briefly lookup your network for just about any printers now linked. If this can be the incredibly initial time you could possibly be area up your printer, it’ll not be identified. So keep in mind to make confident that (Environment printer could not be located on the record) is chosen, then click (Next).
  10. If the following display seems, pick (Open).
  11. Click on (Next).
  12. Click on (Cableless setup).
  13. When the following display seems, hold down the (Wi-Fi ) button A on the printer right up until the orange alarm lamp flashes two occasions and release soon after the 2nd flash, and then click (Next).
  14. Make confident that the blue Wi-Fi lamp flashes rapidly and the green electrical power lamp is lit, and then click on (Next).
  15. The following message will be displayed:
  16. When the subsequent message is displayed, click on (Allow).
  17. Once the connection to the accessibility stage is finished click (Next).
  18. When the following display seems, pick your area, and then click on (Next).
  19. When the following display seems, pick your language and click (Next).
  20. When the following display seems, pick the software program you want to set up, and then click on (Next). If you are not confident which software program you want to set up at this stage, really don’t get worried, as you can constantly uninstall it at a later on stage if you want.
  21. When the following display seems, click (Yes) to agree to the finish consumer license agreement.
  22. Should the following display seem, if you want to generate an alias of the guide on your desktop click (Agree), otherwise click (Do not agree) to skip?
  23. The software program will now download and set up.
  24. Within the Canon IJ Network instrument, display selects the detected printer and click (Next).
  25. When the following display seems, click (Add Printer).
  26. When the following display is displayed, pick the (Canon IJ Network) model of your printer, and click (Add).
  27. The following display will briefly be displayed.
  28. When the following display seems, click (Next).
  29. If this is undoubtedly the incredibly initial time you are surroundings up your printer, in the occasion the following show display is proven, just click on (Execute) and comply with the on-display advice to perform the print head alignment, otherwise click on (Upcoming).
  30. When the following display seems, click (Next).
  31. If you want to register your printer at this stage click (Next), alternatively you can register later on employing the Quick Menu software program, so click (Cancel).
  32. If you want to get aspect in the Extended Survey Program click (Agree). Alternatively, click (Do not agree).
  33. Should the following display seem, if you want to carry out a check print to verify the network setup click (Execute), otherwise to skip this click (Next)?
  34. Click (Exit) to full the set up.

This Printer PRO-10 Wireless the Mac setup

If the wireless setup is nonetheless failing soon after following this manual, please contact us for more help.  or get Information from Official Website Canon